Accessories:  Alumilite Regular

Alumilite Regular Tan - 28 oz

Part Number:  10010

 

Alumilite Regular provides users with an extremely tough, high temperature, rigid urethane that is incredibly easy to use.  The material has a very low viscosity and mix ratio of 1:1 by weight or by volume which allows anyone from the experienced rapid prototyper to the hobby enthusiast to make a perfect part every time.  The material also features a 90 second work time with a color change in the cure to let the user know when his/her pot life is up.  Demold times typically range from 5 to 7 minutes depending on the temperature and mass of the material being casted.

Available in Tan or Black.

 

$30.25

Prior to use, read all Technical Data Sheets/Instructions and Safety Data Sheets linked below.

Alumilite Regular Black - 28 oz

Part Number:  10011

 

Alumilite Regular provides users with an extremely tough, high temperature, rigid urethane that is incredibly easy to use.  The material has a very low viscosity and mix ratio of 1:1 by weight or by volume which allows anyone from the experienced rapid prototyper to the hobby enthusiast to make a perfect part every time.  The material also features a 90 second work time with a color change in the cure to let the user know when his/her pot life is up.  Demold times typically range from 5 to 7 minutes depending on the temperature and mass of the material being casted.

Available in Tan or Black.

 

$30.25

Prior to use, read all Technical Data Sheets/Instructions and Safety Data Sheets linked below.

Alumilite Regular Tan - 2 Gallons

Part Number:  10110

 

Alumilite Regular provides users with an extremely tough, high temperature, rigid urethane that is incredibly easy to use.  The material has a very low viscosity and mix ratio of 1:1 by weight or by volume which allows anyone from the experienced rapid prototyper to the hobby enthusiast to make a perfect part every time.  The material also features a 90 second work time with a color change in the cure to let the user know when his/her pot life is up.  Demold times typically range from 5 to 7 minutes depending on the temperature and mass of the material being casted.

Available in Tan or Black.

 

$94.00

Prior to use, read all Technical Data Sheets/Instructions and Safety Data Sheets linked below.

Specifications:

 

Technical Detail:

 

Product:

Color:

Mix Ratio (wt. or Vol.):

Pot Life:

Demold Time (100 gr. Mass)

Mixed Viscosity (cps.)

Specific Gravity

Shore Hardness (ASTM D-2240)

Shrinkage (in./in.

Tensile Strength (ASTM D-638) (psi)

Elongation (in./in.)

Temperature Resistance

 

 

 

 

 

Alumilite Regular

Tan or Black

1:1

90 seconds

5-8 minutes

190

1.05

72 D

.008

6,000

4-6%

244 F

 

Alumilite Regular Black - 2 Gallons

Part Number:  10111

 

Alumilite Regular provides users with an extremely tough, high temperature, rigid urethane that is incredibly easy to use.  The material has a very low viscosity and mix ratio of 1:1 by weight or by volume which allows anyone from the experienced rapid prototyper to the hobby enthusiast to make a perfect part every time.  The material also features a 90 second work time with a color change in the cure to let the user know when his/her pot life is up.  Demold times typically range from 5 to 7 minutes depending on the temperature and mass of the material being casted.

Available in Tan or Black.

 

$94.00

Prior to use, read all Technical Data Sheets/Instructions and Safety Data Sheets linked below.

Made in the USA

Press Kit

2017 RotoMAAK.com.  Site Designed By CW Productions

We Accept: